aluminum alloy sheet
"
ऑटोमोबाइल विनिर्माण और रेल ट्रांजिट के लिए 1060 फ्लैट एल्यूमिनियम प्लेट
Eorrosion Proof 1060 H*2/H*4/T4/T6 Aluminum Plate Used in Automobile Manufacturing and Rail Transit. 1.Introduction As aluminum reserves in the crust is very rich, It has more advantages over other metals. Aluminum in the future will still have a wide range of applications, for example, the car manufacturers are currently exploring the use of aluminum instead of steel, and make the car lighter. With the progress of technology, aluminum products not only in the aerospace,
5182 मध्यम शक्ति एल्यूमिनियम प्लेट, रेफ्रिजेरेटेड 10 मिमी एल्यूमिनियम प्लेट
5182 Moderate Strength Aluminum Alloy Plates / Sheets for Refrigerated Plate 5182 Aluminum Alloy Plate is one of our best selling products,which has a wide range of usage,because 5182 alloy has good corrosion resistance, excellent weldability, good cold processing, and has a moderate strength, therefore,5182 alloy is widely used for tank truck plate/refrigerated plate/container board/square cabin body panel/car door/fender/floor/body frame/covering parts etc. Product features
इंटरकूलर के लिए हॉट-रोलिंग मिल फिनिश्ड एल्युमिनियम शीट कॉइल फिन स्ट्रिप
Hot - Rolling Mill Finished Aluminum Sheet Coil Fin Strip For Intercooler Application: Heat-Exchange Materials of Intercooler, Radiator, Oil Cooler,Evaporator,Condenser,Air Cooler widely use our Aluminum Fin Strip. We can recommend relevant products or give good suggestions according to customers' requests and our experiece. Specification of aluminum fin strip: No. Specification Details 1 Core Alloy 1060, 3003, etc 2 Cladding alloy 4343, 4045, 7072, 5052 etc 3 Cladding rate 4
स्वनिर्धारित हैवी ड्यूटी एल्युमिनियम फॉयल रोल कोल्ड चेन एल्युमिनियम टांकना सामग्री:
1.Specification of aluminium strip: 1) Core Alloy: 1060, 3003, 5052 etc 2) Cladding alloy: 4343, 4045, 7072, 5052 etc 3) Cladding rate: 4%-18% 4) Thickness: 0.2-3.0mm 5) Width: 12 - 1250mm (max) 6) Temper: HO, H14 etc 7) I. D.: 150mm, 200mm, 300mm, 400mm, 500mm 8) Normal O. D.: 900-1450mmm 9) Other sizes is available according to customer's request 2.Description of our production Chemical composition of core material, cladding material about aluminum alloy and composite
ऑटोमोटिव अनुप्रयोगों के लिए 1.5 मिमी मोटी मिश्रित रंग लेपित एल्यूमिनियम शीट
Aluminium brazing material production Complex assemblies can be turned into single unit by just one pass through a brazing furnace & period; Aluminium brazing facilitates the joining of parts with a near-eutectic Ai-Si filler alloy, the liquid temperature which is about 50C lower than that of the core & period; In serial heat exchanger production the filler alloy is supplied via a thin clad on a core alloy; Compound Material Aluminium brazing material is a sophisticated multi
रेडिएटर के लिए 0.1 x 271mm 3003 + 1.5% Zn + Zr H16 एंटी-सैगिंग एल्युमिनियम अनक्लैड फिन
0.1 x 271mm 3003 + 1.5%Zn + Zr H16 Anti-sagging Aluminum Unclad Fin for Radiator 1. Description of our production Chemical composition of core material, cladding material about aluminum alloy and composite-material for welding heat exchanger 1) Core Material Alloy Si Fe Cu Mn Mg Zn Zr Ti code 3003 0.6 0.7 0.05-0.20 1.0-1.5 － 0.1 0.05 0.03 1 3003+1%Zn 0.6 0.7 0.05-0.20 1.0-1.5 － 0.5-1.50 0.05 0.05 2 3003+1.5%Zn 0.6 0.7 0.05-0.20 1.0-1.5 － 1.0-2.0 0.05 0.05 3 3003+1.5%Zn+Zr 0.5
औद्योगिक मुद्रित एल्यूमीनियम पन्नी रोल, लाख अतिरिक्त मोटी एल्यूमीनियम पन्नी;
0.08 x 62mm 4343/3003+1.5%Zn+Zr/4343 H16 Aluminum Foil Roll for Automotive Radiator Fin 1. Description of our production Chemical composition of core material, cladding material about aluminum alloy and composite-material for welding heat exchanger 1) Core Material Alloy Si Fe Cu Mn Mg Zn Zr Ti code 3003 0.6 0.7 0.05-0.20 1.0-1.5 － 0.1 0.05 0.03 1 3003+1%Zn 0.6 0.7 0.05-0.20 1.0-1.5 － 0.5-1.50 0.05 0.05 2 3003+1.5%Zn 0.6 0.7 0.05-0.20 1.0-1.5 － 1.0-2.0 0.05 0.05 3 3003+1.5%Zn
कंडेनसर वेल्डिंग एल्यूमिनियम फोइल रोल / फिन फोइल वैक्यूम ब्रेजिंग 305 मिमी आईडी का उपयोग करें।
0.10 x 18mm 4343 / 3003+1.5%Zn / 4343 H14 Aluminum brazing Foil Roll for Condenser 1. Description of our production Chemical composition of core material, cladding material about aluminum alloy and composite-material for welding heat exchanger 1) Core Material Alloy Si Fe Cu Mn Mg Zn Zr Ti code 3003 0.6 0.7 0.05-0.20 1.0-1.5 － 0.1 0.05 0.03 1 3003+1%Zn 0.6 0.7 0.05-0.20 1.0-1.5 － 0.5-1.50 0.05 0.05 2 3003+1.5%Zn 0.6 0.7 0.05-0.20 1.0-1.5 － 1.0-2.0 0.05 0.05 3 3003+1.5%Zn+Zr 0
खाना पकाने उद्योग के लिए 1050/1100/3003 हॉट रोलिंग एल्यूमिनियम सर्कल गोल टुकड़ा
1050 / 1100 / 3003 Hot Rolling Aluminum Circle Round Piece For Cooking Industry Product Description: 1. Alloy: 1050, 1060, 1100, 3003 2. Temper: O-H112 3. Thickness: 0.5-8.0mm 4. Diameter: 100-1000mm 5. Tolerance of Thickness:±0.05mm 6. Tolerance of Diammeter:-0.05~+0.10mm 7. Surface Treatment: Mill Finish 8. MOQ: 5MT per Size 9. Leadtime: 15-30 Days 10. Payment Terms: 30% by TT in advance as deposit and 70% balance by TT or L/C at sight. Chemical Composition (WT. %) ALLOY
